EA01164D
Endress+Hauser 9
2. Main menu → Display language: select the language
3. Main menu → Expert → Entry code factory setting → 0000 or enter the entry code defined
by the customer ( do not enter the service code)
4. Main menu → Expert → I/O configuration → alteration code: enter software license code
(I/O alteration code)
Check the data on the wired-on tag plate:
Wired-on tag plate for DK5009, DK50011, DK8009, DK80011:
• Serial number of device
• New order code
• Software license code to be entered (appl. package code)
Wired-on tag plate for DKZ004:
• Serial number of device
• Modification kit serial number
• Device modified with
• New order code
• Software license code to be entered (I/O alteration code)
• Configuration
• Connection data
Fitting the wired-on tag plate (DK5009, DK50011, DK5009, DK50011, DKZ004):
1 →
To Next Page
Loading...
