Endress+Hauser Prosonic M FMU40 - Post Installation Check

Prosonic M
26 Endress+Hauser
Material
(in contact with process)
L00-FMR240xx-16-00-00-de-003
Pos. Part FMU40/FMU41 FMU42/44 FMU43
1 Sensor PVDF PVDF UP
2a Sealing EPDM EPDM or FKM -
2b O-ring EPDM - PA
3Flange
-
PP, PVDF or VA-Stahl 316L
(1.4435 or 1.4404)
1)
1) Endress+Hauser supplies DIN/EN flanges made of stainless steel AISI 316L with the material number 1.4404 or
1.4435. With regard to their temperature stability properties, the materials 1.4404 and 1.4435 are grouped under
13E0 in EN 1092-1 Tab. 18. The chemical composition of the two materials can be identical.
PP or 316 Ti (1.4571)
4Screws - - V2A
5Thread insert for
Mounting bracket
- CuZn CuZn
6 Sensor membrane - - 316 Ti (1.4571)
7 Mounting bracket - 316 Ti (1.4571) 316 Ti (1.4571)
1
2a
3
2a
3
1
1
5
4
7
6
2b
FMU40/FMU41 FMU42/FMU44
FMU43 FMU43