Endress+Hauser Prosonic M FMU40 - Cantilever

Prosonic M
Endress+Hauser 41
Cantilever
L00-FMU4xxxx-06-00-00-yy-005
• The 50 mm (1.97 in) or 62 mm (2.44 in) orifices serve for the mounting of the FMU40 or FMU41 sensor,
respecitvely.
• The 22 mm (0.87 in) orifice may be used for an additional sensor
The cantilever can be mounted in the following ways:
• by a mounting frame (→ ä 42)
• by a wall bracket (→ ä 42)
Fixing screws are supplied.
A B C D for Sensor Material Order Code
585 (23) 250 (9.84) 2 (0.08) 200 (7.87) FMU40 316Ti (1.4571) 52014132
galv. steel 52014131
FMU41 316Ti (1.4571) 52014136
galv. steel 52014135
1085 (42.7) 750 (29.5) 3 (0.12) 300 (11.8) FMU40 316Ti (1.4571) 52014134
galv. steel 52014133
FMU41 316Ti (1.4571) 52014138
galv. steel 52014137
mm (in)
A
DM8
35
50
20
20
105
50/
62
22
C
C
6.5
15
100
25
351007575 B