Endress+Hauser Prosonic M FMU40 - Menu-guided Commissioning; Signal Analysis via Envelope Curve

Prosonic M
Endress+Hauser 37
Product structure FMU44
010 Approval
A Non-hazardous area
1 ATEX II 1/2G EEx ia IIC T6
4 ATEX II 1/2G EEx d (ia) IIC T6
G ATEX II 3 G EEx nA II T6 (in preparation)
2 ATEX II 1/2 D, Alu blind cover
5ATEX II 1/3 D
S FM IS Cl.I,II,III Div.1 Gr.A-G, NI Cl.I Div.2, Zone 0,1,2(in preparation)
T FM XP Cl.I,II,III Div.1 Gr.A-G, Zone 1,2 (in preparation)
N CSA General Purpose
U CSA IS Cl.I,II,III Div.1 Gr.A-G, NI Cl.I Div.2, zone 0,1,2
V CSA XP Cl.I,II,III Div.1 Gr.A-G
K TIIS EEx ia IIC T6 (in preparation)
I NEPSI Ex ia IIC T6 (in preparation)
J NEPSI Ex d(ia) IIC T6 (in preparation)
E NEPSI Ex nA II T6 (in preparation)
Q NEPSI DIP (in preparation)
Y Special version, to be specified
020 Process connection
A 8" 150lbs FF, 316L, max 2.5bar abs./36psia
E UNI flange 6"/DN150/150, PP, max 2.5bar abs./ 36psia,
suitable for 6" 150lbs / DN150 PN16 / 10K 150
F UNI flange 6"/DN150/150, PVDF, max 2.5bar abs./36psia,
suitable for 6" 150lbs /DN150 PN16 / 10K 150
G UNI flange 6"/DN150/150, 316L, max 2.5bar abs. 36psia,
suitable for 6" 150lbs / DN150 PN16 / 10K 150
H UNI flange DN200/200, PP, max 2.5bar abs./ 36 psia,
suitable for DN200 PN16 / 10K 200
J UNI flange DN200/200, PVDF, max 2.5bar abs./ 36psia,
suitable for DN200 PN16 / 10K 200
K UNI flange DN200/200, 316L, max 2.5bar abs./ 36psia,
suitable for DN200 PN16 / 10K 200
L 8" 150lbs FF, PP, max 2.5bar abs./ 36psia
M Mounting bracket FAU20
N 8" 150lbs FF, PVDF, max 2.5bar abs./ 36psia
T UNI flange 4"/DN100/100, PP, max 2.5bar abs./ 36psia,
suitable for 4" 150lbs / DN100 PN16 / 10K 100
U UNI flange 4"/DN100/100, PVDF, max. 2.5bar abs./ 36 psia,
suitable for 4" 150lbs / DN100 PN16 / 10K 100
V UNI flange 4"/DN100/100, 316L, max 2.5bar abs./ 36psia,
suitable for 4" 150lbs / DN100 PN16 / 10K 100
Y Special version, to be specified
030 Power supply; Output
B2-wire; 4-20mA HART
D2-wire; PROFIBUSPA
F 2-wire; FOUNDATION Fieldbus
G 4-wire 90-250VAC; 4-20mA HART
H 4-wire 10.5-32VDC; 4-20mA HART
J 2-wire; 4-20mA HART, 5-point linearity protocol (in preparation)
K 2-wire; PROFIBUS PA, 5-point linearity protocol (in preparation)
L 2-wire; FOUNDATION Fieldbus, 5-point linearity protocol (in preparation)
M 4-wire 90-250VAC; 4-20mA HART,5-point linearity protocol (in preparation)
N 4-wire 10.5-32VDC;4-20mA HART,5-point linearity protocol (in preparation)
Y Special version, to be specified
040 Operation
1 w/o display, via communication
2 4-line display VU331, Envelope curve display on site
3 Prepared for FHX40, Remote display (accessory)
9 Special version, to be specified
FMU44 - product designation, part 1