Installation Batch Controller RA33
12 Endress+Hauser
3.4.3 Support rail/top-hat rail (to EN 50 022)
1. Fasten the top-hat rail adapter (item 1, dimensions → å 6) to the device using the screws
provided (item 2) and open the top-hat rail clips.
a0014176
Fig. 11: Preparing for top-hat rail mounting
2. Attach the device to the top-hat rail from the front and close the top-hat rail clips.
a0014177
Fig. 12: Top-hat rail mounting
To Next Page
Loading...
