Endress+Hauser RA33 - 5.3 Operating Matrix; Language; Display;operation menu; Setup menu

Operation Batch Controller RA33
24 Endress+Hauser
5.3 Operating matrix
For a complete overview of the operating matrix including all configurable parameters, → ä 60.
Language Drop-down list with all available operating languages. Select the language
of the device.
Display/operation menu • Select the group for display (automatic change or fixed display group)
• Setting for the display brightness and contrast
• Display the stored analyses (Day, Month, Year, Billing date, Totalizer)
and batch reports
• Enter a value for the preset counter
• Recipe selection
Setup menu In this Setup, you can configure the parameters for quick commissioning
of the device. Advanced setup includes all important parameters for con-
figuring the instrument function.
•Units
• Signal type
• Pulse value, value (for pulse signal type)
or
• Start of measuring range (for current sig-
nal type)
• End of measuring range (for current sig-
nal type)
•Unit
• Counter unit
• Date and time
Parameters for
quick commissioning
• Advanced setup (settings that are not essential for basic operation of
the device)
Special settings can be configured via "Expert".
Diagnostics menu Device information and service functions for a swift device check.
• Diagnostic messages and list
• Event logbook
• Device information
• Simulation
• Measured values, outputs
Expert menu The Expert menu offers access to all operating options of the device,
including fine tuning and service functions.
• Jump directly to parameters via Direct Access (only on the device)
• Service code for displaying service parameters (via PC operating soft-
ware only)
• System (settings)
•Inputs
•Outputs
• Application
•Diagnostics