Endress+Hauser RA33 - 11 Appendix; 11.1 Operating Functions and Parameters; Language parameters; Display;operation menu

Appendix Batch Controller RA33
60 Endress+Hauser
11 Appendix
11.1 Operating functions and parameters
Direct Access codes are specified for the menu items. In the Expert menu, you can jump directly
to the respective operating option by entering this code.
11.1.1 Language parameters
11.1.2 Display/operation menu
Selection of the displayed group (measured values), display of signal analyses, etc.
German
English
Español
Français
Italiano
Nederlands
Polski
Portuguese
Russkij
ceština
Select the operating language for your device.
Select recipe 020101 Please select recipe.
Only visible if recipe management is activated in Setup/
Advanced setup/Application/Batch information.
Preset counter 020100 Please enter preset counter.
Change group Choose the group which should be displayed.
Change automatically between the configured display
groups or display one of the 6 display groups (→ ä 36)
Display brightness You can adjust the brightness of the display here.
Number: 1-99
Contrast display You can adjust the contrast of the display here.
Number: 20-80
Stored values Display the analyses stored in the device (→ ä 37).
Display 030000 Choose the data which should be displayed. The following
information is displayed depending on the configured dis-
play value:
• Status
•Start time
•End time
•Duration
•Batch name
•Batch number
•Preset counter
• Quantity
•Number
The batch report can be printed using the "Print" option.
Print Print the batch report