Endress+Hauser RA33 - 2 Identification; 2.1 Device Tag; 2.2 Scope of Delivery

Identification Batch Controller RA33
6 Endress+Hauser
2 Identification
2.1 Device tag
2.1.1 Nameplate
Compare the nameplate on the device with the following diagram:
a0014625
Fig. 2: Nameplate of the batch controller (example)
1 Device tag
2 Order code and serial number
3 Supply voltage
4 Power consumption
5 Firmware version
6 Approvals, if available
7 Ambient temperature range
8 Device revision
9 Degree of protection
10 Place and year of manufacture
2.2 Scope of delivery
The scope of delivery of the batch controller comprises:
• Batch controller (field housing)
• Brief Operating Instructions in paper form, Operating Instructions and additional documentation
(on CD-ROM)
• Optional interface cable and DVD set with FieldCare Device Setup parameter configuration soft-
ware
• Optional Field Data Manager software
• Optional mounting hardware for top-hat rail, panel mounting, pipe mounting
• Optional overvoltage protection
!
Note!
Please note the device accessories in Section 8 ’Accessories’.