Technical data Batch Controller RA33
58 Endress+Hauser
a0014276
Fig. 37: Display and operating elements
1 LED green, "Operation"
2 LED red, "Fault indicator"
Function keys:
3 Start batching manually
4 Stop batching manually
5 Numeric keypad
6 Start printing
USB interface
7 USB connection for configuration
Operating keys:
8 -, +, E
Display:
9 160x80 DOT matrix display
Local operation 3 operating keys: "-", "+", "E".
14 function keys:
Start/stop function: Pressing the "Start" button starts a batch run. Press the "Stop" button once to
pause a batching operation currently in progress. Press "Stop" a second time to abort the batch.
Pressing start again restarts the batch cycle.
C function: Press "C" when batching is stopped to reset the counters on the display to their original
values.
Print function: Press "0" and "." simultaneously to print out the last batch run. The "RS232 printer
interface" feature must be purchased to be able to use this function.
Configuration interface USB interface, front-panel, optional Ethernet interface: configuration via PC with PC operating
software FieldCare Device Setup.
Data logging Real time clock
• Drift: 15 min per year
• Power reserve: 1 week
Software • Field Data Manager software MS20: Visualization software and database for analyzing and
evaluating the measuring data and calculated values, as well as tamper-proof data logging
10.0.10 Certificates and approvals
CE mark The measuring system meets the legal requirements of the EU directives. Endress+Hauser confirms
successful testing of the device by affixing to it the CE mark.
Other standards and
guidelines
• IEC 60529:
Degrees of protection provided by enclosures (IP code)
• IEC 61010-1:
To Next Page
Loading...
