Endress+Hauser RIA14 - Display and Operating Elements; Operating the Field Display Unit; Post-Connection Check

RIA14 Operating the field display unit
Endress+Hauser 33
4.4 Post-connection check
Perform the following checks after completing electrical installation of the device:
5 Operating the field display unit
5.1 Display and operating elements
5.1.1 Display
a0011157
Fig. 9: LC display of the field display unit (can be plugged in in stages of 90°)
Device condition and specification Note
Are the device or the cables damaged? Visual inspection
Electrical connection Note
Is the cable type route completely isolated - without loops and
cross-overs?
-
Are the cables strain relieved? -
Is the terminal assignment correct? Compare with the connection
diagram of the terminal block
→ Chap. 4.1
Are all terminal screws tightened? Visual inspection
Is the cable gland sealed? Visual inspection
Is the housing cover tightened? Visual inspection