Endress+Hauser RIA16 - Page 14

Operating the field indicator RIA16
14 Endress+Hauser
6.2.1 Navigation
The operating fields are split into 2 levels.
Menu: Various menu items can be selected on the menu level. The individual menu items are an
aggregation of the associated operating functions.
Operating function: An operating function can be regarded as an aggregation of the operating
parameters. The operating functions are used to operate and configure the device.
Operating keys:
'E' Enter key: Press and hold down the E key for longer than 3 seconds to enter the programming
menu.
– Selecting operating functions.
– Accepting values.
– If the E key is pressed for longer than 3 seconds, the system returns directly to the Home position.
Beforehand, you are asked whether the data entered up to now should be saved.
– Saving data entered.
Selection keys ’+/-’:
– Selecting the menus.
– Configuring parameters and numerical values.
– After selecting the operating function, the value is entered or the setting changed by pressing the
+ or - keys.
!
Note!
If the keys are pressed for an extended period, the digits are changed with increasing speed.
!
Note!
If the + or - keys are pressed in the "Program Name" and "Program Version" operating position, the
display is scrolled horizontally as these positions (7-digit) cannot be displayed completely in the 14-
segment display.
6.2.2 Programming in the operating matrix
a0011262-en
Fig. 10: Programming the field indicator
w
Enter the operating matrix
x
Menu (select with "+" or "-" key)
y
Select the operating functions
z
Enter parameters in the edit mode (enter/select data with "+" or "-" and accept with "E").
{
Go directly to the Home position.
– Beforehand, you are asked whether the data entered up to now should be saved.
|
Exit the menus with "+/-". You are asked whether the data entered should be saved.
}
Prompt to save data (select YES/NO with "+" or "-" key and confirm with "E").