Endress+Hauser RIA16 - Operating the Field Indicator; Display and Operating Elements; Configuration Via Operating Keys

RIA16 Operating the field indicator
Endress+Hauser 13
6 Operating the field indicator
6.1 Display and operating elements
6.1.1 Display
a0011163
Fig. 8: LC display of the field indicator
6.1.2 Display symbols
6.2 Configuration via operating keys
#
Warning!
The device must be configured outside the hazardous area.
a0011261
Fig. 9: Operating keys of field indicator ("-", "+", "E")
To configure the device, open the housing cover. The keys (+, -, E) can now be accessed.
During configuration, the display must be connected to the electronics unit.
1 Bargraph display
1a Indicator for measuring range undershoot
1b Indicator for measuring range overshoot
2 Measured value display
Digit height 26 mm (1.02")
3 14-segment display for units and messages)
4 Symbol ’Programming disabled’
5Unit ’%’
6 'Fault' indicator