Endress+Hauser RIA16 - Page 29

RIA16 Technical data
Endress+Hauser 29
12.0.8 Human interface
Display elements
a0011163
Fig. 15: LC display of the field indicator
Item 1: bargraph display in increments of 10% with indicators for measuring range undershoot (item 1a)/overshoot (item 1b)
Item 2: measured value display, character height 26 mm (1.02")
Item 3: 14-segment display for units and information messages
Item 4: symbol "programming disabled"
Item 5: unit "%"
Item 6: warning symbol "failure"
•Display range
-19999 to +99999
• Offset
-19999 to +99999
• Signalling
Measuring range overshoot/undershoot
• Limit value violation
Lower/upper limit value exceeded
Operating elements 3-key operation (-/+/E) integrated in device, access with housing open
Remote operation Configuration
The device is configured with the FieldCare PC operating software. FieldCare Device Setup forms
part of the scope of supply of Commubox FXA291 or TXU10-AC (see ‘Accessories’) or can be
downloaded free of charge from the Internet at www.endress.com.
Interface
Configuration interface at device; connection to PC via configuration cable (see "Accessories").
Configurable device parameters (selection)
Measuring dimension, measuring ranges (linear/square), setup block using user code, failsafe mode,
digital filter (damping), offset, limit value (min/max/alarm), alarm limit values freely adjustable.