Operation of the time delay DL Y1 / DL Y2
With this setting a time delay DL Y between the switch
threshold
SP and the relay activation can be set.
If the measurement value falls below the preset switch
threshold
SP (without hysteresis) within the time delay DL Y
then the switch delay time counter is reset to zero. The time
counter restarts after a new infringement of the preset switch
threshold
SP.
This is also valid for minimum monitoring.
6.3 Operating parameters
Parameter Variations
Default
settings
Actual
settings
User code
CO DE
Presettable operating
code by the user.
An already existing code can
only be changed it the old
code is available to release
the unit settings. Once this
has been entered the code
can be changed.
Value range:
00 to 99
“0" means there is no
active user code
0
PA RA
DL Y
HY
SP
Meas. size
À Relay deactive (powerless), yellew LED off
Contactor
38
To Next Page
Loading...
