Endress+Hauser Soliswitch FTE20 - Flange Version Installation

Mounting Soliswitch FTE20
10 Endress+Hauser
1
2
1.
2.
3.
A0017363
 4 Installation of the version with hinged rotary paddle
1 Attach sealing ring (1) 60x48x3 mm (2.36x1.89x0.12 in).
2 Slide the rotary paddle into the connecting flange (3).
3 Tighten nut with open-ended wrench AF 60 (2).
4.3.1 Turning the housing to the right position
A0017364
 5 Correct housing position
4.3.2 Installation of the flange version
The flange version is available as an accessory. The dimensions are provided in the "Technical
data" section →  31.