50
Previous/Next
Group
Selecting or moves to the previous or next page.
Alarm Selecting resets the DVR’s outputs including the internal buzz-
er during an alarm.
Panic Selecting starts panic recording of all cameras, and selecting
again stops panic recording.
Camera Menu Selecting
displays the Camera Menu.
Zoom: Selecting Zoom and choosing the camera number zooms
the current playback image of the selected camera on the
screen.
Audio: Selecting Audio toggles audio playback On and Off.
Show/Hide Text-In: Selecting Show Text-In or Hide Text-In shows
or hides the text-in data on the screen if the video was recorded
with text-in data.
Edit Group: Selecting Edit Group enters to the Active Cameo
mode.
Export Selecting
displays the Export menu.
• A–B Clip-Copy: Selecting A–B Clip-Copy will set the starting
point of the video to be clip copied, and the icon displays at
the bottom-left corner of the screen. Selecting A–B Clip-Copy
again will set the ending point of the video to be clip copied
and displays the Clip-Copy screen.
• Clip-Copy: Select Clip-Copy, and the Clip-Copy screen ap-
pears to allow clip copy setup.
• Print: Selecting Print allows you to print a selected image.
Status Selecting
will allow you to check the status of the DVR’s sys-
tem, inputs and storage.
Data Source Selecting allows you to select the data source to be searched.
Exit Selecting
exits the search mode and enters the live monitoring
mode.
To Next Page
Loading...
