What to do if Eneo DVR shows no live video?
If your Eneo DVR shows no live video, check the camera video cable and connections, check the monitor video cable and connections, confirm that the camera has power, and check the camera lens settings.
How to fix Eneo DLR4B-08/500DV that won't power on?
If your Eneo DVR does not power on, check the power cord connections and confirm that there is power at the outlet.
What to do if Eneo DLR4B-08/500DV live video is very bright?
If the live video on your Eneo DVR is very bright, and a cable is attached to the 'Loop' connector, make certain it is connected to a properly terminated device.
What does it mean when the icon displays but the Eneo DLR4B-08/500DV DVR is not recording?
When the Eneo DVR is in the Pre-Event recording mode, the yellow and display when there is no event, and the DVR is not recording. The red and display when any event occurs and the DVR starts recording.
General| Model | DLR4B-08/500DV |
|---|---|
| Channels | 8 |
| Storage Capacity | 500GB |
| Video Compression | H.264 |
| Power Supply | 12V DC |
| Video Input | 8 BNC |
| Network Interface | RJ45 |
| Video Output | HDMI, VGA |
| Network Interface Type | Ethernet |
To Next Page
