4 Installation
4. Installation
It is important to check the necessary additional documentation before
installation. At time of delivery, your product and supplementary
documentation are as far as possible adapted to your base machine.
WARNING
Never attempt to increase the
maximum capacity of the equipment
by modifications not approved by the
supplier. Risk of personal injury and
damage to property.
WARNING
Welding is not permitted. It can have
a negative impact on safety. Risk
of personal injury and damage to
property. For welding, contact your
dealer or engcon Nordic AB.
WARNING
Beware of moving parts. A lack of
awareness may lead to crush injuries.
Risk of personal injury.
IMPORTANT
Ensure miscibility with the base machine's
hydraulic oil prior to installation. If you are in
any doubt, contact your lubricant supplier.
An incorrect mixture could damage hydraulic
components.
4.1. Identification
Check that your product's rating plate matches the information on the EC
Declaration of Conformity. If there is any deviation, contact the supplier
before you begin initial installation.
18
To Next Page
Loading...