Engcon QS45 - Introduction; General; Scrapping and Recycling

1 Introduction
1. Introduction
1.1. General
These instructions for use contain important information about your
product's functions and characteristics, and how to use it in the best way.
Before you begin using the product, it is important that you read and
understand the content of these instructions, especially the sections that
address safety.
In addition to these instructions, you must study and understand the
applicable safety information for the relevant base machine as well as
any other equipment involved.
The instructions are supplied with supplementary documentation
providing more detailed descriptions of the installation, fitting, operation
and maintenance of control systems and custom modifications for your
specific product.
Information, images, illustrations and specifications used in the
instructions are based on product information that was available at the
time of going to press. Images and illustrations used in the instructions
are typical examples and not intended to be exact depictions of various
part of the product. We reserve the right to make changes without prior
notice.
Always store the instructions for use together with any other
supplementary information in a safe manner and such that it is always
available.
1.2. Scrapping and recycling
engcon makes constant efforts to reduce its environmental impact.
engcon's products comprise at least 99 per cent recyclable material.
All assembly and service work must take place in compliance with
legislation and ordinances governing the environment, health and
occupational safety. This refers to all work with residual materials
including handling, storage and processing. To prevent contamination
of soil and water, spillages must be avoided. Should a spillage occur, it
must be dealt with.
Hazardous waste may only be disposed of by those authorized to do so.
All waste produced must be disposed of in compliance with applicable
legislation and ordinances:
- Metal and plastics to be recycled.
- Hydraulic hoses are normally used for energy recovery (sort as
hazardous waste).
5