Wireless Mode The wireless mode supports 802.11b/g/n mixed operation.
Channel HT Mode The default channel bandwidth is 40 MHz. A larger channel can
provide better transmit quality and speed, while 20 MHz channel
bandwidth affords higher stability at farther distances.
Extension Channel When operating with a 40 MHz channel, this specifies which
additional wireless channel is to be used. Selecting Auto allows
the device to select the optimum channel.
Channel / Frequency The channel availability is determined by the United State’s law to
ensure compliance with FCC regulation. The device operates in
the 2.4GHz spectrum. Please select “United States”.
AP Detection AP Detection can help to select a best channel by scanning the
nearby area for other access points and the channels that they
are broadcasting on.
Current Profile Configure up to eight different SSIDs; it allows for the division of
clients into separate groups to access the network. Press Edit to
configure the profile and place a check to enable an additional
SSID.
Profile Isolation Restrict client communications with different VID by selecting the
Radio button.
Accept / Cancel Press Accept to confirm the changes or Cancel to return to the
previous settings.
Accept does not apply the changes – you must go to Status -> Save / Load
to apply the new settings. Please refer to Chapter 6.1 for more information.
To Next Page
Loading...
