EnGenius EOC-2610 - Appendix A - Specifications

Long Range Wireless Access Point / Client Bridge Version 1.0
57
Appendix A – Specifications
Hardware Specification
MCU/RF Atheros AR2316 Single chip
Memory 32MB SDRAM
Flash 8MB
Physical Interface One 10/100 Fast Ethernet RJ-45
Reset Button
One SMA Connector
One switch (external and internal antenna switching)
LED indicators Power/ Status
LAN (10/100Mbps)
WLAN (Wireless is up)
3 x Link Quality (Client Bridge mode)
¾ Green: Good Quality
¾ Yellow: Marginally Acceptable Quality
¾ Red: Bad Quality
Power Requirements Active Ethernet (Power over Ethernet) Proprietary PoE design
Power Adapter 24 V/0.8A DC
Regulation Certifications FCC Part 15C/15B, EN 300 328/EN 301 489-1/-17
RF Specification
Frequency Band 802.11b/g
2.412~2.472GHz
Modulation Technology OFDM = BPSK, QPSK, 16-QAM, 64-QAM
DSSS = DBPSK, DQPSK, CCK
Operating Channels 802.11b/g
11 for North America, 14 for Japan, 13 for Europe
Receive Sensitivity
(Typical)
802.11g
-92 dBm @ 6Mbps
-74 dBm @ 54Mbp
802.11b
-97 dBm @ 1Mbps
-89 dBm @ 11Mbps
Available transmit power
(Average power)
FCC ETSI
Frequency Power Frequency Power
2.412~2.462
GHz
IEEE802.11g
26dBm@6~24Mbps
25dBm@36Mbps
23dBm@48Mbps
22dBm@54Mbps
2.412~2.472
GHz
IEEE802.11g
26dBm@6~24Mbps
25dBm@36Mbps
23dBm@48Mbps
22dBm@54Mbps
2.412~2.462 27dBm@1~11Mbps 2.412~2.472 27dBm@1~11Mbps