© 2024 Enphase Energy Inc. All rights reserved.
January 2024
140-00277-03
25
HCS Installation and Operation Manual
Moving and storage instructions
NOTE: Both hardwired and plug-type HCS and IQ EV Charger models are intended for xed installations. For
mounting requirements, consult the “Mounting procedures” section of the “Installation instructions” in this manual.
Always turn o input power to the EVSE at the circuit breaker panel prior to hard-wiring or disconnecting from the service
lines. Likewise, always turn o input power to the EVSE at the circuit breaker panel prior to plugging into or unplugging from
a NEMA socket.
When transporting the EVSE, do not lift or carry the entire unit by the charge cable. Likewise, do not lift or carry the entire
unit by the exible conduit and input conductors or the NEMA plug.
The EVSE has a non-operational storage temperature range of -40°C to 80°C (-40°F to 176°F).
To Next Page
Loading...
