Enterasys WS-AP3705i - Certifications of Other Countries; Other Country Specific Compliance Standards, Approvals and Declarations; RF Safety Distance

Enterasys Wireless WS-AP3705i
B-8
Certifications of Other Countries
The WS-AP3705i has been certified for use in various other countries. Once the correct country
code is selected, the Wireless AP automatically uses the proper frequencies and power outputs for
that country code.
It is the responsibility of the end user to select the proper country code for the country within
which the device will be operated, or run the risk violating local laws and regulations.
Other Country Specific Compliance Standards, Approvals and Declarations
• IEC 60950-1 CB Scheme + National Deviations
• AS/NZS 60950.1 (Safety)
• AS/NZS 3548 (Emissions via EU standards – ACMA)
• AS/NZS 4288 (Radio via EU standards)
• EN 300 328 (2.4 GHz)
• EN 301 893 (5 GHz)
• EN 301 489-1 & -17 (RLAN)
• IEEE 802.11a (5 GHz)
• IEEE 802.11b/g (2.4 GHz)
• IEEE 802.11n
• IEEE 802.3af (PoE)
RF Safety Distance
The antennas used for this transmitter must be installed to provide a separation distance of at least
22 cm from all persons and must not be co-located or operating in conjunction with another
antenna or transmitter.
аΠ᝾ᇟ፾ҔѠ᡼Ӧ୔
࿶ࠠԄᇡ᛾ӝϐեф౗৔ᓎႝᐒǴߚ࿶೚ёǴϦљǵ୘ဦ܈٬Ҕޣ֡όளᏰԾᡂ׳ᓎ౗ǵ
уεф౗܈ᡂ׳চ೛ϐ܄ϷфૈǶ
եф౗৔ᓎႝᐒϐ٬ҔόளቹៜૐӼӄϷυᘋӝݤ೯ߞǹ࿶ว౜Ԗυᘋ౜ຝǴᔈҥջଶ
ҔǴ٠ׯ๓ԿคυᘋБளᝩុ٬ҔǶ߻໨ӝݤ೯ߞǴࡰ٩ႝߞݤೕۓբ཰ϐคጕႝ೯ߞǶ
եф౗৔ᓎႝᐒ໪הڙӝݤ೯ߞ܈π཰ǵࣽᏢϷᙴᕍҔႝݢᒟ৔܄ႝᐒ೛ഢϐυᘋǶ
5.25 ~ 5.35GHz ࠻ϣ٬Ҕ
Draft