EasyManua.ls Logo

Enthermics DC250 - Installation

Enthermics DC250
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
MN-37072 • Rev 2 • 05/16 • Designer Series Blanket Warmer
Installation
Preparation
Before operating the appliance, clean both the interior and exterior with a damp cloth and mild soap
solution. Wipe with an appropriate disinfectant. Wipe dry with a clean cloth or air dry.
DANGER
To prevent serious personal injury, death, or
property damage:
Do not steam clean, hose down or flood the
interior or exterior with water or liquid solution
of any kind. Do not
use water jet toclean. Failure
to observe this precaution will void the warranty.
DANGER
To prevent serious injury, death, or
property damage:
Do not use this warming appliance in
the presence of flammable anesthetic
mixtures (with air or with oxygen or
nitrous oxide).
Not category AP or APG equipment
General Information
Speci cations:
Single-chamber warming appliance
White epoxy-coated steel exterior
casing and interior insert
Single pane, energy-effi cient,
e-coated glass window in door
allows for inventory observation
Easy push-button door for hands-
free operation
Door is fully gasketed and hinged on
the right side of the unit
WarmSafe™ incorporates a multiple
zone warming technology (Patent
No: US 8,217,316; US 8,581,152) that
heats where and when it is needed.
All chamber surface temperatures
are monitored, providing an
effi cient balance of heat, low-energy
consumption and minimal heat loss.
DC350 & DC750 include a heated
center shelf to further optimize heat
distribution throughout the cavity
Four (4) non-skid rubber feet
are standard
Electronic Control:
Adjustable temperature range of
32°C - 71°C (90°F - 160°F)
Operates in celsius or fahrenheit
Four digit LED display
On/Off button
Up and down adjustment buttons
Actual temperature button
Interior light button
Built-in speaker for audible feedback
Integrated control lockout feature
Additional features:
LED interior lighting casts a
comforting blue glow with two (2)
different intensity settings and
off mode.
Safety: In the event of a power
failure the appliance will retain
its programming and operates as
previously set when power
is restored.
Safety: A warming shut-off system,
separate from the electronic
control, prevents overheating.
Convenience: Access point
and removable cover on the
back panel allows the addition
of data logging or temperature
management hardware.
Convenience: Stackable
confi gurations are available
for additional capacity or to
pair with fl uid warmers.
Clearance requirements:
3" (76mm) from rear
1" (25mm) from top and sides
3/4" (19mm) from bottom

Other manuals for Enthermics DC250

Related product manuals