enTourage Pocket eDGe - Wired Network Connection; Using USB-to-Ethernet Adapter; Static IP Address Configuration

25
Connect your Pocket eDGe to a Wired Local Area Network
YoucanusetheUSBporttoconnecttoawiredLANusingaUSB-to-Ethernetadaptor.
SeetheacceptableUSB-to-Ethernetadaptorsontheaccessoriespage.
1.Checkyournetworkcongurationsettingsorcontactyournetworkadministratorfordetailsonadding
adevicetoyourLANnetwork.
2.PlugtheUSB-to-EthernetadaptorintotheUSBportontheenTourageeDGe.
3.ConnecttothelocalareanetworkusingtheEthernetadaptor.
IfyouneedtouseastaticIP:
1.Gotothehomescreenandopentheappsmenu.
2.SelectSettings.
3.OntheSettingsmenu,chooseNetwork controls.
4.OntheNetworkcontrolsmenu,chooseEthernet settings.
5.OntheEthernetsettings,selectthecheckboxnexttoUsestaticIP.EnterthevaluesfortheIPad-
dress,Netmask,Gateway,andDNS1andDNS2.Seeyournetworkadministratorforthesevaluesifyou
donotknowthem.
Return to Contents