enTourage Pocket eDGe - Using the Projector; Connecting Device to Projector; Projector Display Options

58
Using the Projector
ToconnectthedevicetoaprojectoryouwillneedtohaveaUSB-VGAadaptorthatispoweredseparately,andis
alsoDisplayLinkcertied.Seewww.entourageedge.com/accessories.
1.OpentheappsmenuandselecttheProjectoricon.
2.MakesureyourUSBvideoadaptorispluggedintotheUSBportonthedeviceandconnectedtotheVGAdis-
play.
3.Onthetabletscreen,changethestatusfromOff toRunning.
4.SelectthebuttonnexttoActivationtochangetheProjectorstatustoEnabled.
5.Settheresolutionifnecessary.Newerprojectorswillauto-negotiatetothecorrectresolution.Olderprojectorswill
defaulttothelowestresolutionavailable.Enterthefollowingvaluesforresolution,dependingonwhichscreenyouare
goingtoproject:
• Tabletscreen:480by800
• Readerscreen:600x800.
6.Selectthescreenyouwanttoproject.Thedefaultisthetablet.Youcanchoosefromthefollowing:
• DisplayTablet
• DisplayReader
• ReaderPortrait
NOTE:Rememberyoucanswitchthetabletorientationusingtherotatebutton.
ReturntoContents