ENVIRO-TEC
19
FORM ET115.24-NOM11 (118)
FILTERS, THROWAWAY
The type of throwaway lter most commonly used on
fan coil units should be replaced on a regular basis.
The time interval between each replacement should be
established based on regular inspection of the lter and
should be recorded in the log for each unit. Refer to the
chart below for recommended lter size for each product
type and size. If the replacement lters are not purchased
from the factory, the lters used should be the same type
and size as that furnished from or recommended by the
factory. Consult the factory for applications using lter
types other than the factory standard or optional product.
Figure 7a-7d: Filter removal
Figure 7a
Figure 7b
Figure 7c
Figure 7d
To Next Page
Loading...
Need help?
General
