Enviro HL SERIES - INSTALLATION

ENVIRO-TEC
29
FORM ET115.24-NOM11 (118)
INSTALLATION
MOUNTING
Important: Do not overtighten the screws.
Overtightening may strip the threads and will void
the warranty.
Using #8-3/4" screws (quantity six), install the assembly
using the provided standos.
Risk of Electric Shock
Disconnect or isolate all power supplies
before making electrical connections.
More than one disconnection or
isolation may be required to completely
de-energize equipment. Contact with
components carrying hazardous
voltage can cause electric shock and
may result in severe personal injury
or death.
WIRING
Install the wiring so it does not cause a hazard, and is
protected against electrical and mechanical damage. .
Risk of electric shock
Ground the FRBii according to local,
national, and regional regulations.
Failure to ground the FRBii may
result in electric shock and severe
personal injury or death.
Ground the assembly from the EARTH terminal (W2)
to the enclosure.
Ratings
Model(s)
30VA – PC-01-0134
PK-FCU030-0 (25-3043-7)
50VA – PC-01-0135
PK-FCU050-0 (25-3043-15)
Voltage 120 through 277VAC
Current (fan relays) 12A
Operating temperature -4°F to 140°F (-20°C to 60°C)