EOS ProControl 2 plus Series User Manual

ProControl User’s Manual v2.2X
10 \8100\0074_1017
2.3 Password
When the system is first turned on the password screen is displayed and the user is
prompted to enter the password to gain access to the system. " EOS# is the default
password. The password on the Series 2
plus
was designed as a low-level security
feature. It is not sufficient in and of itself to withstand a determined effort at system
entry. The ProControl unit can be configured to bypass the password screen when
the unit is powered up.
Ÿ
Up
⁄
Down
CUSTOMER ID TAGNAME
ENTER PASSWORD: BAA
_
Use the Up and Down keys to change
the character displayed above the
cursor.
Field
CUSTOMER ID TAGNAME
ENTER PASSWORD: BAA
_
The Field key is used to move the
cursor to the next character to be
edited.
Enter CUSTOMER ID TAGNAME
ENTER PASSWORD: EOS
_
The enter key submits the password
for approval.
If the password was entered correctly, the following screen will be displayed for
about a second before the operations screen is displayed:
Password Accepted
VER 2.XXX : 1
ROM Version # User Setup Version #
Otherwise, the following message will be displayed for a second and the user will be
returned to the password menu:
Incorrect Password
2.4
Operations
Screen
After the password has been entered correctly, the operations screen is displayed.
The operations screen allows the user to set system parameters and to review the
status of all system inputs and outputs.
WELL1 OFF
ALARMS SET
>MANUAL

EOS ProControl 2 plus Series Specifications

General

Brand	EOS
Model	ProControl 2 plus Series
Category	Controller
Language	English