Need help?Do you have a question about the EOS ProControl 2 plus Series and is the answer not in the manual?
General| Brand | EOS |
|---|---|
| Model | ProControl 2 plus Series |
| Category | Controller |
| Language | English |
Overview of the ProControl Series 2plus SCADA system and its capabilities.
Explanation of fundamental I/O types including digital and analog inputs/outputs.
Introduction to the system's ability to monitor status and initiate actions for process control.
Explains how inputs are categorized into normal and exception states for control and alarm generation.
Details startup, process tasks, shutdown sequences, and automatic operation modes.
Covers manual operation, analog output processes, PID loops, and proportional outputs.
Description of the 2-line x 20-character LCD display and its fields.
Explains the 12-button keypad and its use for system control and navigation.
Procedure for entering the system password to gain access.
Overview of the screen used for setting parameters and reviewing system status.
How to use I/O keys to scroll through and view system I/O points.
How digital inputs are displayed, including their active or inactive states.
How digital outputs are displayed, including their ON/OFF states and lamp status.
How analog input values, units, and alarm limits are displayed and adjusted.
How analog output percentages and modes are displayed and adjusted.
Using the Menu key to access and configure system behaviors like Alarms and Reports.
Commands to initiate system startup and shutdown sequences.
Procedure to log off the system and return to the password menu.
How to view the last memo sent from a remote ProView user.
Displays a summary of all digital and analog inputs and outputs.
Settings for networking, DHCP, and IP addresses (WAN/LAN).
How to toggle analog outputs between Manual, PID, and Proportional control modes.
Explanation of the meaning of the System Status, Connect, and Network LEDs.
Information on configuring and receiving facsimile status reports.
How the system sends alerts via text messages or pages to mobile devices.
How to configure and receive email status and alarm reports, including data logs.
Provides example diagrams illustrating typical wiring for various ProControl input/output configurations.
To Next Page
