ProControl User’s Manual v2.2X
20 \8100\0074_1017
3.0 REPORTING FEATURES
3.1 Fax Report
(Dial-up
Modem Units)
The ProControl unit will keep you informed of your system! s operations with
facsimile status reports. With the supplied ProView software you can configure the
unit to send fax reports to up to two different numbers. You can also have these
reports sent on a daily basis, at regular intervals during the day, or when triggered
by specific process tasks. You can send one at any time by using the Fax Now
option either from the menu on the ProControl! s display, or through the ProView
software.
The fax report you receive will contain several fields, each denoted by a shadow
box. The number of fields will depend on the configuration of your system. For
instance, you would not see a field indicating Analog Outputs if your system does
not contain any of these.
The fields as you will see them are shown below. All information enclosed in
brackets is variable and depends on your particular system configuration.
<FAX RECIPIENT>
will indicate the intended fax recipient! s name.
THE <SYSTEM NAME> SYSTEM IN <SITE LOCATION> AT <TIME> ON <DATE>
SETUP VERSION X : ROM VERSION 2.x : MODEL B1
will indicate the name and location of your system, the date and time at which the
fax report was initiated, your current ProView setup version, and the current
firmware version 2.X.
To Next Page
Loading...