ProControl User’s Manual v2.2X
23 \8100\0074_1017
3.2 Text
Message or
Page Alerts
The ProControl unit can alert you to important conditions at your site via a text
message or page alert. Any system that is not in manual mode, that is, executing
process tasks or the startup or shutdown sequences, can send a message up to
eighty characters in length to a mobile phone or alphanumeric pager or up to
nineteen digits in length to a numeric pager. With ProView you can select up to
two mobile phones or pager numbers to be alerted. Each process task or
startup/shutdown algorithm is capable of sending a message to either or both of the
recipients. The text messages are configured by your system integrator according
to your specifications.
An example message is shown below:
3.3 Email
Report
(Ethernet and
Cellular Data
Units)
The ProControl unit will keep you informed of your system! s operations with email
status and alarm reports. The status reports can also include logged data files in
.csv format at user defined intervals,
which can be opened with Microsoft Excel.
With the supplied ProView software you can configure the unit to email reports to
up to five different email addresses. You can also have these reports sent on a daily
basis, at regular intervals during the day, or when triggered by specific process
tasks. You can send one at any time by using the Email Now option either from the
menu on the ProControl! s display, or through the ProView software.
The email report you receive will contain the same fields as described in section 3.1
Fax Reports but will also include the WAN or LAN address as applicable to the
unit.
ANYTOWN SITE
High water level EQ Tank
System shut down!
Call Fred to fix: 555-6789
To Next Page
Loading...
Need help?
General
