ProControl User’s Manual v2.2X
1 \8100\0074_1017
1.0 SYSTEM OVERVIEW
1.1 General
The ProControl Series 2
plus
is a small but powerful supervisory control and data
acquisition (SCADA) system. By combining process control and remote capabilities
in one unit, the Series 2
plus
can act as a central supervisory and data management
tool for any stand-alone operation. The ProControl Series 2
plus
can perform
multiple tasks:
• Stand-Alone Control: The ProControl Series 2
plus
provides powerful and
straightforward, event-driven process control; everything from simple on/off
control to complex startup sequences and PID control loops. It can interface
with up to 78 electrical devices (float switches, pressure transducers, pH
transmitters, flow meters, pumps, blowers, etc.), and will simultaneously execute
several control routines for your operation. It is an extremely versatile process
controller.
• Remote Control and Monitoring: The ProControl Series 2
plus
gives you a
window into your operation from any remote location, with our easy-to-use
PROVIEW
TM
software and reliable, proven communications via broadband
internet, cellular data connection or land-line modem. You! ll have the same
level of control as if you were at the site. No other SCADA controller gives you
the ProControl! s level of real-time remote control capability.
• Reporting: The ProControl Series 2
plus
will keep you informed, with
scheduled email or fax status reports, and instant text/pager messages for alarm
conditions. No longer do you have to assume what! s happening at your remote
operation.....the ProControl will tell you exactly.
• Datalogging: As your information manager, the ProControl Series 2
plus
will
record all operating conditions in its internal memory, while keeping track of
flow totals, duty cycles, etc. Have your data emailed to you, or access your
system remotely for download or review at any time. The ProControl is an
invaluable tool for reporting, troubleshooting and trend graphing.
One or more of these features can be used in your installation; they are standard in
every ProControl unit.
To Next Page
Loading...