ep RPL201 - Page 63

REV. 09/2022
11
F
No. Maintenance content Method of operation Note Frequency
6
Clean the lithium battery
and charger with a dry
cloth or compressed air.
Perform a visual
inspection, Wear
insulated gloves and
shake it gently
Make sure it tight weekly
7
Whether the external
wiring harness has worn,
imprint, creases and
exposed line core
Perform a visual
inspection
Make the wiring harness
xed well
weekly
8
Check that the surface of
lithium-ion battery looks
clean
No dust, no water, no
corrosion, oxidation,
rust, etc.
Clean surface if you found
dust, corrosion, oxidation,
rust by using dustless
cloth or air compressor
,water battery is strictly
prohibited to use
weekly
9
Check that the outside
screws of the battery are
fastened
Torque wrench
correction requires no
loosening
Reinforce screws weekly
10
Check for water or foreign
matter in the plug and
socket and check for rust
or charring(if necessary)
Perform a visual
inspection
check the reason for
analysis and give it a x
Monthly
11
Check the cable for
damage and loose joints(if
necessary)
Perform a visual
inspection
check the reason for
analysis and give it a x
Monthly
12
Check the battery case
for abnormalities such as
cracks, deformation, and
bulging.
Perform a visual
inspection
check the reason for
analysis and give it a x
Monthly