Epever DR3210N-DDS - Page 36

32
Self-consumption
12mA/12V; 6mA/12V (Low-power mode)
12mA/12V; 8mA/24V
4mA/12V; 3mA/24V(Low-power mode)
26mA/12V; 15mA/24V
19mA/12V; 10mA/24V
(Low-power mode)
Temperature
compensate
coefficient
④
－3mV/℃/2V(default)
Grounding
Common negative
BATT2Full voltage
13.8V/12V
13.8V/12V; 27.6V/24V(default)
BATT2 Charge return
voltage
13V/12V
13V/12V; 26V/24V(default)
AES signal port
⑤
12VDC/Max.200mA(3.81-4P)
5VDC/Max.200mA(2*(3.81-4P))
RS485 com. port
⑤
5VDC/Max.200mA(3.81-4P)
Com. baud rate
⑥
115200(default)
LCD backlight time
⑦
60S(default)
① When the lithium battery is 12V and the BMS is protected, the lithium battery voltage may rise to 17V(DR*106N) or 35V(DR*206N、DR*210N).
It may damage the load; please consider the load's voltage.
② At minimum operating environment temperature.
③ At 25℃ environment temperature.
④ The Temperature compensate coefficient is zero and not changeable when the main battery type is a lithium battery.
⑤ AES port is 12V/200mA, and RS485 port is 5V/200mA are independent of DR1106/2106/3106N models, the AES port output voltage is the
battery voltage. The above two ports of DR1206/2206/3206/2210/3210N models share the power of 5VDC/Max. 200mA