Epever STI200 - Page 14

10
switch‟, when the input voltage is higher than low voltage protect
value.
12V
24V
48V
Low Voltage
Protect Value
10.5
21
42
Low Voltage
Recover Value
13
26
52
Input Over Voltage Protection
The output is switched off when the input voltage is higher than
over voltage shut off value, also the output is auto-switched on when
the input voltage drops below over voltage recover value.
12V
24V
48V
Over Voltage Shut
Off Value
16
32
64
Over Voltage
Recover Value
15
30
60
Fault Protection
The inverter will shut down when the output voltage is error or
when the inverter has inner fault.