11
Over Temperature Protection
The inverter will shut off when the internal temperature is
overheating. And it automatic restarts when the temperature recovers
to the normal level.
Electronic Protect for Reverse Polarity
The Electronic circuit works to protect the inverter from
damage while input reverse polarity. And the inverter will get right
while the input is right.
Others
Saving Mode
When the switch is on “Saving” side, the inverter will enter into
the Saving Mode. It will shut off the output if the loads value is less
than 20VA. Then restart and detect the power of the load again after
10s. If the load is more than 20VA, the inverter will turn on the
output .Otherwise it will shut off output again. It cycles like this. So
please don‟t use the saving mode if the load is smaller than 20VA.
To Next Page