26
RFRPD Room Thermostat CP4D
Copy Function
Copy function may only be used if the thermostat is in the 7d mode.
Press
PROG
. Select the day of the week you want to copy from.
Press
BOOST
.
The day of the week that you have selected will be shown with ‘COPY’.
The next day will begin to ash on the top of the screen.
Rotate
clockwise to copy the times and temperatures to that day.
Rotate
anti clockwise to skip a day.
You can copy to multiple days by rotating
clockwise.
Press
when copying has been completed.
When in AUTO mode, rotate
to adjust the temperature setpoint.
‘OVERRIDE’ will appear on the screen.
Press
or after 5 seconds the thermostat will operate to this temperature,
until the next switching time.
To cancel temporary override, press
AUTO
to return to the automatic mode.
Temporary Override
To Next Page
Loading...
