EPH Controls CP4D - Installer Menu

30
RFRPD Room Thermostat CP4D
Installer menu
To access the installer menu, press and hold
PROG
and for 5 seconds.
When in the installer menu, rotate
to navigate and press to select.
Use
AUTO
,
MAN
or
OFF
to go back a step.
P0 1: Operating Mode (Normal / Optimum Start / TPI)
P0 2: Hi Lo (limiting the thermostat)
P0 3: Hysteresis (dierential)
P0 4: Calibration
P0 5: Frost Protection
P0 6: Holiday mode
P0 7: Backlight
P0 8: PIN
Exit: Exit from menu