EPH Controls CP4D - To Disconnect the RFRPD Thermostat from an RF1 B Receiver

61
CP4D
This can be done from either the RFRPD thermostat or the RF1B receiver.
To disconnect the RFRPD Thermostat
from an RF1B receiver
On the RFRPD thermostat:
Press connect button
on the side of the thermostat,
‘--’ will appear on the screen.
Hold
TIME
for 10 seconds, ‘ADDR’ appears on screen,
Press
2 times to return to the normal screen – the thermostat is
now disconnected.
On the RF1B receiver:
Press
Connect
for 3 seconds to enter pairing mode,
Press
Connect
for 10 seconds and System LED will turn on,
Press
Manual
to exit, the thermostat is now disconnected.