9
RFRPD Room Thermostat CP4D
Mounting & Installation
Caution!
Installation and connection should only be carried out by a qualied
person.
Only qualied electricians or authorised service sta are permitted to
open the thermostat.
If the thermostat is used in a way not specied by the manufacturer, its
safety may be impaired.
Prior to setting the thermostat, it is necessary to complete all required
settings described in this section.
This thermostat can be mounted in the following ways:
1) Directly mounted on wall.
2) Free standing - Stand Included.
Note: For accurate temperature control it is recommended to mount the
thermostat as per the installation drawing on Page 11.
*If installing multiple CP4D please see page 15 & 50.
Note: If installing multiple CP4D please ensure to keep a minimum of
25cm distance between receivers.
To Next Page
Loading...
