Epiroc ER-L Series - Page 75

Safety and operating instructions
© Anbaufräsen PC GmbH | 3390 5221 01 | 2020-09-07
Original Instructions
75
Type ERL 700
Carrier weight class
1
15 - 25 t (33070 - 55116 lbs)
Service weight
2
700 kg (1543 lbs)
Weight without adapter
3
600 kg (1324 lbs)
Dimensions
Total length
Length of cutter drum
Diameter of cutter drum
1230 mm (48.43 in.)
390 mm (15.35 in.)
450 mm (17.72 in.)
Nominal power 70 kW (94 hp)
Oil flow rate idling, max. 200 l/min (52.8 gal (US)/min)
Oil flow rate, recommended at 200bar (2900psi) 160 l/min (42.3 gal (US)/min)
Operating pressure, max. 350 bar (5075 psi)
Rotational speed, recommended 75 rpm
Pick speed 1.8 m/s (5.9 fps)
Number of picks 30
Pick shaft diameter 22 mm (0.87 in.)
Maximum cutting force at 350 bar (5075 psi) 52.00 kN (11690 lbf)
Maximum torque at 350 bar (5075 psi) 11700 Nm (8630 ft lbs)
Maximum rock hardness 45 MPa (6527 psi)
Gear oil volume 4 l (1.06 gal)
Oil volume hydraulic motor 3 l (0.79 gal)
Hydraulic connections (Drum cutter)
Pressure / tank line
Leakage oil line
M42x2
M30x2
Hose lines (inside diameter)
Pressure / tank line
Leakage oil line
20 mm (0.79 in.)
20 mm (0.79 in.)
1
Weight applies to standard carriers only. Any variations must be agreed with AnbaufräsenPCGmbH and / or the car-
rier manufacturer.
2
Drum cutter including adapter plate of medium size. Please note that the working weight can be considerably higher,
depending on the adapter plate.
3
Drum cutter including rotatable upper part. Accessory parts such as the adapter plate are not included.