Epiroc ER-L Series - Page 76

Safety and operating instructions
76 © Anbaufräsen PC GmbH | 3390 5221 01 | 2020-09-07
Original Instructions
Type ERL 1100-1 ERL 1100-2 ERL 1100-3
Carrier weight class
1
25 - 35 t (55116 - 77162 lbs)
Service weight
2
900 kg (1984 lbs)
Weight without adapter
3
660 kg (1455 lbs)
Dimensions
Total length
Length of cutter drum
Diameter of cutter drum
1270 mm (50.00 in.)
430 mm (16.93 in.)
500 mm (19.69 in.)
Nominal power 120 kW (161 hp)
Oil flow rate idling, max. 320 l/min (84.5 gal (US)/min)
Oil flow rate, recommended at 200bar (2900psi) 240 l/min
(63.4 gal (US)/min)
260 l/min
(68.7 gal (US)/min)
300 l/min
(79.3 gal (US)/min)
Operating pressure, max. 350 bar (5075 psi)
Rotational speed, recommended 75 rpm
Pick speed 2.0 m/s (6.6 fps)
Number of picks 26
Pick shaft diameter 30 mm (1.18 in.)
Maximum cutting force at 350 bar (5075 psi) 70.0 kN
(15737 lbf)
78.0 kN
(17535 lbf)
93.6 kN
(21042 lbf)
Maximum torque at 350 bar (5075 psi) 17.5 kNm
(12907 ft lbs)
19.5 kNm
(14382 ft lbs)
23.4 kNm
(17259 ft lbs)
Maximum rock hardness 60 MPa (8702 psi)
Gear oil volume 4 l (1.06 gal)
Oil volume hydraulic motor 5 l (1.32 gal)
Hydraulic connections (Drum cutter)
Pressure / tank line
Leakage oil line
M42x2
M30x2
Hose lines (inside diameter)
Pressure / tank line
Leakage oil line
25 mm (0.98 in.)
20 mm (0.79 in.)
1
Weight applies to standard carriers only. Any variations must be agreed with AnbaufräsenPCGmbH and / or the car-
rier manufacturer.
2
Drum cutter including adapter plate of medium size. Please note that the working weight can be considerably higher,
depending on the adapter plate.
3
Drum cutter including rotatable upper part. Accessory parts such as the adapter plate are not included.