Epiroc ER-L Series - Page 77

Safety and operating instructions
© Anbaufräsen PC GmbH | 3390 5221 01 | 2020-09-07
Original Instructions
77
Type ER 1500-0L ER 1500-1L ER 1500-2L ER 1500-3L
Carrier weight class
1
20 - 40 t (44100 - 88200 lbs)
Service weight
2
1450 kg (3197 lbs)
Weight without adapter
3
1200 kg (2646 lbs)
Dimensions
Total length
Length of cutter drum
Diameter of cutter drum
1440 mm (56.69 in.)
590 mm (23.23 in.)
680 mm (26.77 in.)
Nominal power 120 kW (161 hp)
Oil flow rate idling, max. 320 l/min (84.5 gal (US)/min)
Oil flow rate, recommended at
200bar (2900psi)
200 l/min
(52.8 gal (US)/min)
240 l/min
(63.4 gal (US)/min)
260 l/min
(68.7 gal (US)/min)
300 l/min
(79.3 gal (US)/min)
Operating pressure, max. 350 bar (5075 psi)
Rotational speed, recom-
mended
75 rpm
Pick speed 2.6 m/s (8.5 fps)
Number of picks 24
Pick shaft diameter 30 mm (1.18 in.)
Maximum cutting force at 350
bar (5075 psi)
45.6 kN
(10251 lbf)
51.5 kN
(11579 lbf)
57.3 kN
(12881 lbf)
68.8 kN
(15467 lbf)
Maximum torque at 350 bar
(5075 psi)
15.5 kNm
(11432 ft lbs)
17.5 kNm
(12907 ft lbs)
19.5 kNm
(14382 ft lbs)
23.4 kNm
(17259 ft lbs)
Maximum rock hardness 80 MPa (11603 psi)
Gear oil volume 4.5 l (1.19 gal)
Oil volume hydraulic motor 5 l (1.32 gal)
Hydraulic connections (Drum
cutter)
Pressure / tank line
Leakage oil line
M42x2
M30x2
Hose lines (inside diameter)
Pressure / tank line
Leakage oil line
25 mm (0.98 in.)
20 mm (0.79 in.)
1
Weight applies to standard carriers only. Any variations must be agreed with AnbaufräsenPCGmbH and / or the car-
rier manufacturer.
2
Drum cutter including adapter plate of medium size. Please note that the working weight can be considerably higher,
depending on the adapter plate.
3
Drum cutter including rotatable upper part. Accessory parts such as the adapter plate are not included.