Eppendorf 5430 - Page 14

Product description
Centrifuge 5430/5430 R
English (EN)
14
Rotor
FA-45-24-11-HS
24 tubes 1.5/2.0 mL.
With adapters:
• 0.2 mL PCR tubes
• 0.4 mL tubes
• 0.5 mL tubes
• 0.6 mL Microtainer
30,130 × g/
17,500 rpm
3.75 g
• Aerosol-tight
(3)
rotor
lid (aluminum).
• Max. g-force/speed
(30,130 × g/17,500
rpm) only with tubes
approved by the man-
ufacturer for this
speed.
• PTFE-coated (particu-
larly resistant to
chemicals), marked:
coated
• Spin columns avail-
able, better with rotor
FA-45-24-11-kit.
•The rotor can only be
tightened and loos-
ened using the special
rotor key for rotor
FA-45-24-11-HS (see
p. 42).
≤ 21 s/16 s
≤ 61 s/65 s (soft)
Rotor
F-45-64-5-PCR
64 PCR tubes (0.2 mL)
or
eight 5-tube or 8-tube
PCR strips,
each with the enclosed
adapters.
13,543 × g/
11,800 rpm
3.4 g
(without
adapter)
≤ 12 s/15 s
≤ 62 s/65 s (soft)
Rotor
F-45-18-17-Cryo
18 Cryo tubes
or
18 sealable centrifugation
tubes,
max. Ø: 16.9 mm.
With supplied adapters: max.
Ø: 13.4 mm, max. tube length:
50 mm.
8,324 × g/
8,900 rpm
8.7 g • Setting the g-force/
speed in increments
of 10 × g or 10 rpm.
≤ 8 s/11 s
≤ 77 s/85 s (soft)
Max. capacity Max. g-force
(rcf)/speed
(rpm) without
adapter
Max.
load per
rotor
bore
(1)
Notes
Acceleration/
deceleration time
(2)
(soft): with soft ramp