Epson 1390 - Page 13

Flatbed Inkjet Printer
１３
１３
12．Finish setting, single click” Ensure”>”Property” window, single click”Ensure” and get back to
the windows of “printing preview” to finish the setting, ignore position “centered ”, have the
setting about “position” for the image “top”, and set the data value of “left” to “0”, therefore, the
printing position of the image would as below, and please single click” print”。
13．When the all setting of the printing has been done, if the media of printing has been loaded on the
flatbed, and the flatbed has been ready on the initialized position, you can start to print by click
“ensure” now。