EasyManua.ls Logo

Epson 1410Wi - Starting a Slide Show or Presentation

Epson 1410Wi
299 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
File type Movie codec Audio codec Recording quality
(extension)
.mpg MPEG-2 MPEG-1 Layer 1/2 Maximum bit rate: 12 Mbps
You can play back audio from Maximum resolution: 1280 ×
MPEG contents. 720
You cannot play back audio
from Linear PCM and AC-3
content.
Make sure the file is not
named with an .mpeg
extension.
.mp4 MPEG-4 ASP MPEG-4 AAC-LC
MPEG-4 AVC
.wmv WMV9 WMA
.avi Motion JPEG Linear PCM
ADPCM
Note: For best results, do not use a USB storage device with a slow access speed or the movies may
not play back correctly. You cannot project files to which DRM (Digital Rights Management) is applied.
Parent topic: Projecting a PC Free Presentation
Starting a Slide Show or Presentation
After connecting a USB device to the control pad or projector, you can switch to the USB input source
and start your slide show, video, or presentation.
Note: You can change the Slideshow operation options or add special effects by highlighting Option at
the bottom of the screen and pressing Enter.
1. Change the source to USB1.
The PC Free screen appears.
112

Table of Contents

Related product manuals