6. Do any of the following as necessary:
• To change to a different source at any time, press the Menu button on the remote control, select
Source, then select the source you want.
• To annotate on the right screen, press the Menu button on the remote control, select Target Pen
Mode, then select Screen Right. Set the Pen Mode setting to PC Free Annotation.
• To use computer interactive mode on the right screen, press the Menu button on the remote
control, select Target Pen Mode, then select Screen Right. Set the Pen Mode setting to PC
Interactive.
• To reverse the left and right images, press the Menu button on the remote control and select
Swap Screens.
• To make one image larger, press the Menu button on the remote control, select Screen Size,
then select Larger Left or Larger Right.
Note: When you select LAN as the source for one of the screens, you cannot change the Pen Mode
setting.
7. To return to displaying one image, press the Esc button on the remote control.
Note: The following operations cannot be performed during split screen projection:
• Menu settings
• E-Zoom
• Switching aspect mode
• Operations made by the User button on the remote control
• Auto Iris
Parent topic: Using the Interactive Pens
Computer Interactive Mode
You can connect your computer to the projector with a USB cable, then use the pen as a mouse to
navigate, select, and interact with your programs.
You can use computer interactive mode in Windows without installing any special software. For Mac
OS X, you need to install the Easy Interactive Driver.
168
To Next Page
Loading...
