4. Connect the other end of the cable (if applicable) to your device.
Note: You can also connect a USB device directly to the projector's USB-A port.
Parent topic: Connecting to External USB Devices
Related topics
Projecting a PC Free Presentation
Selecting the Connected USB Source
You can switch the projector's display to the source you connected to the USB-A port on the control pad
or the projector.
1. Make sure the connected USB source is turned on, if necessary.
2. Press the Source Search button on the remote control or control pad, then select USB1.
Parent topic: Connecting to External USB Devices
Disconnecting a USB Device From the Control Pad or Projector
When you finish presenting with a connected USB device, you must prepare to disconnect the device
from the control pad or projector.
1. If the device has a power button, turn off and unplug the device.
2. Disconnect the USB device (or cable) from the control pad or projector.
Parent topic: Connecting to External USB Devices
Connecting to a Document Camera
You can connect the Epson DC-06 document camera to your projector's USB-A document camera port
to project images viewed by the camera.
Note: For additional features supported by software, connect the Epson DC-06 document camera to
your computer instead of the projector. You may be able to connect different Epson document camera
models to your projector's Computer port. See the document camera's manual for instructions.
1. Locate the USB cable that came with the document camera.
49
To Next Page
Loading...
