1. Twist off the tip of the pen to remove it.
2. Twist on the new tip.
Parent topic: Projector Maintenance
Related references
Optional Equipment and Replacement Parts
Replacing the Control Pad Batteries
If the control pad stops working after it has been used for a period of time, you may need to replace the
batteries. The control pad uses two AA alkaline batteries.
Caution: Use only the type of batteries specified in this manual.
Note: If you have the optional remote control cable set (ELPKC28), you can use it instead of batteries to
power the control pad.
213
To Next Page
Loading...
